EvergreenLANDSCAPERS

Service

Landscape design-build & hardscaping

A patio or retaining wall lasts as long as the base and drainage under it. These are the specifications to insist on and what they cost installed.

Natural flagstone patio framed by shade trees and planting beds

Project tiers

TierTypical scopeInstalled budget
Basic refreshSod, mulched beds, foundation planting$4,000–$10,000
Mid-range buildSod, small paver patio, irrigation, plantings$10,000–$25,000
Full estate transformationPatios, retaining walls, lighting, smart irrigation, mature trees$25,000–$50,000+ ($10–$25+/sq ft integrated; $40+/sq ft hardscape-heavy)

Design: master site plan and 3D renderings

A standalone master plan with 3D renderings typically costs $2,200–$6,180: planting plan $800–$2,500, grading and drainage plan $1,200–$4,000, irrigation and lighting plan $500–$2,000. Many design-build firms credit part or all of the fee back when you contract the installation with them.

Paver patios and walkways

Installed cost runs $15–$40+ per square foot depending on material and access. The base is where low bids cut corners:

Base depths per Concrete Masonry & Hardscapes Association (CMHA, formerly ICPI) guidance; compact in lifts.
ApplicationCompacted dense-graded aggregate baseBedding layer
Pedestrian patio or walk, well-drained soil4–6 in.1 in. bedding sand (screeded, not compacted before laying)
Clay soil or deep freeze-thaw climate8 in. or more1 in. bedding sand
Residential driveway (vehicular)8 in. or more with 80 mm pavers1 in. bedding sand
MaterialInstalled range
Concrete interlocking pavers$15–$26 / sq ft
Natural flagstone / bluestone$24–$38 / sq ft
Travertine / porcelain$28–$44 / sq ft

Segmental retaining walls

Walls run $20–$50+ per square foot of wall face, roughly $100–$300+ per linear foot depending on height.

The 4-foot rule. Walls over 4 ft of total height, or walls supporting a surcharge such as a slope, driveway or structure, almost always need a municipal permit and a design stamped by a licensed professional engineer.

  • Geogrid: required from roughly 3–4 ft of height; layers typically extend 60%–70% of wall height back into compacted backfill.
  • Drainage core: 12 in. of clean crushed stone behind the units with a perforated drain pipe at the base, daylighted or tied to a storm system.
  • Leveling pad: compacted aggregate pad with the first course buried below grade.

Sod, grading and drainage

ItemInstalled range
Sod — grade and lay$1.00–$2.25 / sq ft
Sod — strip old lawn, amend with topsoil/compost, lay$2.00–$3.50 / sq ft
Underground irrigation$2.50–$5.00 / sq ft covered
Rough and fine re-grading$1–$3 / sq ft of work area
French drain and catch basin system$1,500–$4,500
Soil amending$0.25–$0.75 / sq ft
Demolition and haul-away$500–$2,500+
Hardscape / wall permits$100–$500+

Grade soil away from the foundation (a common target is 6 in. of fall over the first 10 ft) before any patio or bed goes in. Drainage fixed after the hardscape is built costs several times more.

Price your project in the Landscape Estimator

Related pages

Get a site walk and an itemized proposal

Send your property or project scope. A vetted regional crew walks the site, measures turf, beds, grades and irrigation zones, and returns a fixed-price written proposal.